Curiosity rover takes ‘selfie’ at Mojave Site on Mount Sharp

PIA19142
Image: NASA/JPL-Caltech/MSSS

This self-portrait of NASA’s Curiosity Mars rover shows the vehicle at the “Mojave” site, where its drill collected the mission’s second taste of Mount Sharp.

The scene combines dozens of images taken during January 2015 by the Mars Hand Lens Imager (MAHLI) camera at the end of the rover’s robotic arm. The pale “Pahrump Hills” outcrop surrounds the rover, and the upper portion of Mount Sharp is visible on the horizon. Darker ground at upper right and lower left holds ripples of wind-blown sand and dust.

The annotated version below labels several of the sites Curiosity has investigated during three passes up the Pahrump Hills outcrop examining the outcrop at increasing levels of detail. The rover used its sample-collecting drill at “Confidence Hills” as well as at Mojave, and in late February was assessing “Telegraph Peak” as a third drilling site.

PIA19142_fig1
Image: NASA/JPL-Caltech/MSSS

 

The view does not include the rover’s robotic arm. Wrist motions and turret rotations on the arm allowed MAHLI to acquire the mosaic’s component images. The arm was positioned out of the shot in the images, or portions of images, that were used in this mosaic.

Curiosity used its drill to collect a sample of rock powder from target “Mojave 2” at this site on 31 January 2015. The full-depth, sample-collection hole and the shallower preparation test hole beside it are visible in front of the rover in this self-portrait. The Mojave site is in the “Pink Cliffs” portion of the Pahrump Hills outcrop. The outcrop is an exposure of the Murray formation, which forms the basal geological layer of Mount Sharp.

The frames showing the rover in this mosaic were taken during the 868th Martian day, or sol, of Curiosity’s work on Mars  (14 January 2015). Additional frames around the edges to extend the amount of terrain included in the scene were taken on Sol 882 (29 January 2015). The frames showing the drill holes were taken on Sol 884 (31 January 2015).

For scale, the rover’s wheels are 50 centimetres (20 inches) in diameter and about 40 centimetres (16 inches) wide. The drilled holes in the rock are 1.6 centimetres (0.63 inch) in diameter.